Earth Leakage Relay (SETTING Range 0.5 To 8.0A)
₹8,408.40
Product Code: JRC 072
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 7120 times
Product Description
Features
- Solid state reliability
- Built in Test facility
- Very low primary current sensing
- Core balance current transformer supplied along with the unit
APPLICATION
The relay used for protection of LV/MV distribution systems requiring very high sensitivity for earth faults.
PRINCIPLE OF OPERATION
The relay measures the earth leakage current from the
CBCT and if it exceeds the threshold, it extends a trip
signal after the operating time.
Ratings
Operating characteristics
OVER LOAD RATING
Burden
Accuracy
Relay setting :
0.5A to 8.0A in steps of 0.5A
Definite time setting :
1 – 15 sec in steps of 1sec
Instantaneous :
Less than 40 milli seconds
Definite time setting :
As mentioned above
Over load continuous :
Withstands continuous primary fault current
of 400 A.
Short time :
Withstands primary fault current of 1200A
for 10seconds
Aux. Supply :
Less than 5W
Drop – off / pick – up :
Between 80% to 95%
Operating time :
+/- 5% or +/- 30ms whichever high
Contact Ratings
Contact Durability
Insulation
STANDARD COMPLIANCE
TRIP / ALARM :
10A at 24V DC / 230V AC
Loaded conatct :
10,000 operations min
Unloaded contact :
20,000 operations min
- 2 KV RMS,50 Hz for 1 minute/2.5KV for 1sec between all terminals and case
- 1KV RMS, 50 Hz for 1 minute across open contacts
Type :
JRC 072
Panel cutout dimension :
73 X 137 mm (WxH)
Accuracy Test :
IEC 60255-151
Insulation Test :
IEC 60255-27
TERMINAL DIAGRAM
