Non-Directional, Inverse Time, 2 Pole O/C Relay With Instantaneous Highest Elements
₹21,450.00
Product Code: JRC 064
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 4443 times
Product Description
Features
- Software based design
- Programmable time current characteristics
- Choice of four IDMT curves
- Draw out case
- Wide range auxiliary supply
- Low burden
APPLICATION
The relay provides time graded phase protection of Generators, Transformers, Feeder, capacitors
etc.,
PRINCIPLE OF OPERATION
The relay measures the line current from each of the phases and if it exceeds the set threshold,
then relay extends a trip signal after an operating time. The relay's operating time is determined
by selecting one of the four inverse time characteristics. The relay has facility to active / inhibit the
high set protection feature. The relay output contacts are self reset / Hand reset type. Relay operation without any fault current is determined by trip test facility.
Ratings
Settings
OVER LOAD RATINGS
Burden
Current rating :
1A / 5A
Auxiliary Supply :
1) 20-60V DC
2) 75 – 150V AC / DC
3) 175 – 300V DC / 185 – 250V AC
2) 75 – 150V AC / DC
3) 175 – 300V DC / 185 – 250V AC
Operating characteristics :
1) 3.0s Normal Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
5) 0.6s Extermely Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
5) 0.6s Extermely Inverse
Phase Overcurrent :
50% to 200% in steps of 10% or
20% to 140% in steps of 10%
20% to 140% in steps of 10%
TMS :
0.1 to 1.0 in steps of 0.01
Phase Hi-set :
200% to 3200% in steps of 200%
Current input:
2 times rated continuous
20 times Rated for 3s
40 times of rated for 1s
20 times Rated for 3s
40 times of rated for 1s
Current input :
0.2VA per phase (rated 5A)
0.05VA per phase (rated 1A)
0.05VA per phase (rated 1A)
Aux. Supply :
Less than 8W(Non operated)
Less than 10W(Operated)
Less than 10W(Operated)
Accuracy
Contact Ratings
Contact Durability
INSULATION
STANDARD COMPLIANCE
Mechanical Design
Operating value :
105% to 120% of setting value
Drop-off / pick-up :
Between 80% to 95%
Operating time :
±5% or ±30ms whichever is higher
High Set Operating Value :
±5% or ±30ms whichever is higher
High Set Operating Time :
Less than 30ms @ 2 times current Setting
Reset Time :
160ms to 180ms
Trip / Alarm :
10A at 24V DC/230V AC
Unloaded contacts :
10,000 operations
Loaded contact :
20,000 operations
- 2KV RMS, 50 Hz for 1 minute/ 2.5KV FOR 1 sec.
Between all terminals and cases - 1KV RMS, 50 Hz for 1 minute across open terminals
Accuracy test
: IEC 60255-151
Insulation test
: IEC 60255-27
Weight :
2500gms. Approx.
Case Size :
144 sq mm with depth of 232 mm
Installation :
Flush mounting
Panel cuttout :
138 x 138 mm
Terminal Diagram
