Combined AC Under Voltage & Over Voltage Relay
₹15,864.42
Product Code: JRV 014
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 7307 times
Product Description
Features
- Software based design
- Wide auxiliary supply
- Low burden
APPLICATION
The relay provides Under and Over voltage protection of
Motors, Generators, Capacitor Banks etc.
PRINCIPLE OF OPERATION
The Relay, JRV 014, provides under & over voltage protection for power systems. The Relay operating time is determined by the set definite time. The relay measures the voltage from input PT and if the voltage is below the set threshold, under voltage stage operates and if the voltage is above the set threshold, over volt age stage operates and it extends a trip signal after the operat- ing time, which is determined by set definite time. The relay output contacts are self reset type. The TEST button facilitates testing of relay contacts for the trip and alarm circuits
TECHNICAL DATA RATING
SETTINGS
OVER LOAD RATINGS
Burden
Accuracy
Voltage rating :
110V / 230V /415 AC
Auxiliary supply :
20 to 60V DC
: 75 to 150V DC
: 175 to 300V DC/185-250V AC
: 75 to 150V DC
: 175 to 300V DC/185-250V AC
Under voltage setting :
30 to 95% in steps of 5%
Over voltage setting :
105 to 170% in steps of 5%
Definite time :
0 to 25s in steps of 0.1s
Voltage input :
2 times Rated continuous
Input voltage :
Less than 2VA at Rated
: Less than 0.5VA at rated 5A
: Less than 0.5VA at rated 5A
Auxiliary supply :
Less than 3W (Non Operated)
: Less than 5W(Operated)
: Less than 5W(Operated)
Operating value :
+/- 5%
Operating time :
+/- 5% or +/- 20ms
Instantaneous Time :
Less than 40ms
Drop-off to pickup ratio :
80% to 95%
Contact Ratings
Contact Durability
Insulation
Mechanical Design
Relay Rating :
10A at 24V DC/230V AC
Loaded contact :
10,000 operations
Unloaded contact :
20,000 operations
- 2KV RMS, 50 Hz for 1 minute / 2.5 KV for 1 sec .
Between all terminals and cases - 1 KV RMS, 50 Hz for 1 minute across open contacts
Accuracy test :
IEC 60255-151
Insulation test :
IEC 60255-27
Weight :
Approx. 1500 gms
Case size :
144 sq mm with depth of 117 mm
Installation :
Flush mounting
Panel cutout :
138 X 138 mm
TERMINAL DIAGRAM
