Single pole, non-directional, over current relay for locked rotor protection
₹14,586.00
Product Code: JRC 032
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 7498 times
Product Description
Features
- Software based design
- Wide setting range
- Wide auxiliary supply
- Low burden
Application
The relay provides earth fault protection of Generators,Motors, Transformers, Feeder etc., and where definite time protection is required.
Principle of Operation
The relay provides single pole over current protection for power systems. The Relay operating
time is deter mined by the set definite time. The relay measures the current from input CT and if
it exceeds the set thresh old, it extends a trip signal after the operating time, which is determined
by set definite time. The relay output contacts are self reset type. TEST button facilitates testing
of relay.
Ratings
Settings
Over Load Rating
Burden
Accuracy
Current rating ( In ) :
1A or 5A
Aux. Supply :
20 to 60V DC
75 to 175V AC / DC
175 to 300V DC
185 to 250V AC
75 to 175V AC / DC
175 to 300V DC
185 to 250V AC
JRC 032 O/C setting :
25 to 400% in steps of 25 %
or 50 to 800% in steps of 50%
or 50 to 800% in steps of 50%
Definite time setting :
0 to 25s in steps of 0.1s
Current input :
2 times Rated continuous
20 times Rated for 3s
40 times Rated for 1s
20 times Rated for 3s
40 times Rated for 1s
current input :
0.2VA Per phase (at Rated 5A)
0.05VA per Phase (at Rated 1A)
0.05VA per Phase (at Rated 1A)
Aux. supply :
Less than 3W (Non Operated)
Less than 5W (Operated)
Less than 5W (Operated)
Operating value :
±5%
Operating time :
± 5% or ±20ms
Instantaneous time :
Less than 40ms
Contact Ratings
Contact Durability
Insulation
Standard Compliance
Relay rating :
10A at 24V DC/230V AC
Loaded contact :
10,000 operations min.
Unloaded contact :
100,000 operations min.
- 2KV RMS, 50 Hz for 1 minute / 2.5 KV for 1 sec .
Between all terminals and earth. - 1 KV RMS, 50 Hz for 1 minute across open contacts
Weight :
2000 gms. (approx)
Case Size :
144sq mm, depth 232mm
Installation :
Flush mounting
Panel cutout :
138mm x 138mm
Accuracy test :
IEC 60255-3
Insulation test :
IEC 60255-5
TERMINAL DIAGRAM
