Microprocessor based facia annunciator(24 window)
₹26,769.60
Product Code: JAV 014
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 5892 times
Product Description
Features
- Sequence selection according to ISA standards
- Trip and Non-Trip selection
- Built in push button for test, silence, accept and reset functions
- DC fail indication (optional)
- Repeat alarm contact (optional)
Application
Used for annunciation of different parameters and status in a system.
Description
J-WATCH micro-processor based annunciator from JVS is of modular design.
JAV 014 provides Programmable trip/non trip and NO/NC selection for the each windows through
DIP switches. Trip/Non trip selection can be performed through the DIP switches in the front panel
of the unit. NO/NC selection can be performed by the DIP switches at the rear end of the unit. A
set of built in push buttons for test, silence, accept and reset functions are provided in front panel
of the unit. Terminals are also provide to connect external push buttons for remote operation as
and when required.
The windows are lit by red super bright LEDs. Yellow, Amber, Green or Blue LED with colour filters can also be provided on specific request.
Auxiliary DC supply failure to the annunciator can be displayed in window designated as "DC fail annunciation" as an optional feature. A separate DC sensing card with mounting arrangement is provided which can be housed inside the Control Panel.
Repeat alarm contact (1NO output) for each window can be provided as optional feature
The windows are lit by red super bright LEDs. Yellow, Amber, Green or Blue LED with colour filters can also be provided on specific request.
Auxiliary DC supply failure to the annunciator can be displayed in window designated as "DC fail annunciation" as an optional feature. A separate DC sensing card with mounting arrangement is provided which can be housed inside the Control Panel.
Repeat alarm contact (1NO output) for each window can be provided as optional feature
Ratings
Aux. Supply :
20-60VDC or 75 - 150V AC/DC or 175 - 300 VDC/185 - 250 VAC
Initiation:
Potential free NO / NC contact
Flash rate:
About 60 flashes per minute for flash
About 30 flashes per minute for slow flash
About 30 flashes per minute for slow flash
Response time :
20ms. (maximum)
Display :
Super bright LEDs, Red as standard
(Amber, Green, Yellow, or Blue as optional)
Window Display :
Photo negative or computer generated transparency
Dimensions of window :
64mm x 23mm(W x H) – Diplay area
Burden Auxiliary supply :
< 1W per window
Output Contact rating :
5A at 24V DC/230V AC
(1NO – Trip, 1NO – Non Trip)
(1NO – Trip, 1NO – Non Trip)
Contact rating of repeat alarm relay :
10A at 24VAC/ 230V AC
Mode Of SelectionN
Mechanical Design
| Switch position | ||||
|---|---|---|---|---|
| S1 | S2 | S3 | S4 | MODE |
| - | 0 | - | - | Hooter off during Test |
| - | 1 | - | - | Hooter on during Test |
| - | - | 0 | 0 | Manual Reset |
| - | - | 0 | 1 | Auto Reset |
| - | - | 1 | 0 | Ring Back |
Type Designation :
JAV 014-24
No. of Windows :
24
Front Face Dimensions in (mm) :
432W X 144H X 125D
Panel Cutout Dimensions in (mm) :
428W X 138H
TERMINAL DIAGRAM
