Single Pole, Directional Over Current Or Earth Fault Relay Without High Set Feature
₹22,165.00
Product Code: JRP 011 / 21
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 4971 times
Product Description
Features
- Software based design
- Programmable time current characteristics
- Choice of four curves
- Selectable characteristic angle
- Programmable directional / Non-directional element
- Draw - out case
Application
The relay provides time graded phase and earth fault protection of Parallel transformers, Transformer feeders, Parallel feeders, ring main system etc.,
Principle of Operation
The relay measures the line current from each of the phases and if it exceeds the set threshold, then relay extends a trip signal after an operating time.
The relay's operating time is determined by selecting one of the four inverse time characteristics. The relay has facility to active / inhibit the high set protection
feature. The relay output contacts are self reset . Relay operation without any fault current is determined by trip test facility.
Ratings
Settings
Characteristics Angle setting
OVER LOAD RATING
Current rating ( In ):
1A / 5A
Voltage rating :
110v, 50Hz For Phase
63.5V, 50Hz For E/F
63.5V, 50Hz For E/F
Auxiliary Supply :
1) 20 – 60V DC
2) 75 - 150V AC /DC
3) 175 – 300V DC or
185 – 250V AC
2) 75 - 150V AC /DC
3) 175 – 300V DC or
185 – 250V AC
Operating characteristics :
1) 3.0s Normal Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
Phase O/c (IDMT):
50 to 200% in steps of 10%
Earth fault (IDMT):
5 to 80% in steps of 5%
TMS (separate for O/c & E/F):
0.1 to 1.0 in steps of 0.01
O/C setting :
Lead 30º
Lead 45º
Lead 60º
Lead 45º
Lead 60º
E/F setting :
Lag 12.5º
Lag 30º
Lag 45º
Lag 30º
Lag 45º
Current input :
2 times rated continuous
20 times rated for 3s
20 times rated for 3s
Burden
Accuracy
Contact Ratings
CONTACT DURABILITY
INSULATION
Standard Compliance
Current input:
0.2VA per phase (rated 5A)
0.05VA per phase (rated1A
0.05VA per phase (rated1A
Aux. Supply:
Less than 8W (Non operated)
Less than 10W (Operated)
Less than 10W (Operated)
Operating value :
105% to 120% of setting
Drop-off / pick-up :
Between 80% to 95%
Operating Time :
±5% or ±30ms which ever is higher
Phase angle :
±9° of the operating angle
Reset Time :
160ms to 180ms
Relay rating :
10A at 24V DC/230V AC
Loaded contact :
10,000 operations min.
Unloaded contact :
20,000 operations min.
- 2KV RMS, 50 Hz for 1 minute I 2.5 KV for 1 sec .
Between all terminals and earth. - 1 KV RMS, 50 Hz for 1 minute across open contacts
Weight :
2500 gms. (approx)
Case Size :
144sq mm, depth 232mm
Installation :
Flush mounting
Panel cutout :
138mm x 138mm
Accuracy Test :
IEC 60255-3
Insulation Test :
IEC 60255-5
TERMINAL DIAGRAM
