Single Pole, Directional Over Current Or Earth Fault Relay With High Set Feature
₹22,165.00
Product Code: JRP 012 / 22
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 5409 times
Product Description
Features
- Software based design
- Programmable time current characteristics
- Choice of four curves
- Selectable characteristic angle
- Programmable directional element / Non-directional element
- Draw - out case
Application
The relay provides time graded phase and earth fault
protection of Parallel transformers, Transformer feeders,
Parallel feeders, ring main system etc.,
PRINCIPLE OF OPERATION
The relay measures the line current from each of the phases or earth fault and if it exceeds the
set threshold, then relay extends a trip signal after an operating time. The relay's operating time
is determined by selecting one of the four inverse time characteristics. The relay has facility to
active / inhibit the high set protection feature. The relay output contacts are self reset . Relay
operation without any fault current is determined by trip test facility
Ratings
SETTINGS
Characteristics Angle setting
OVER LOAD RATINGS
BURDEN
Current rating ( In ) :
1A / 5A
Voltage rating :
110V, 50Hz For Phase
63.5V, 50Hz For E/F
63.5V, 50Hz For E/F
Aux. Supply :
1) 20 to 60V DC
2) 75 to 150V AC / DC
3) 175 to 300V DC
185 to 250V AC
2) 75 to 150V AC / DC
3) 175 to 300V DC
185 to 250V AC
Operating characteristics:
1) 3.Os Normal Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
Phase O/c (IDMT):
50 to 200% in steps of 10%
Earth fault (IDMT):
5 to 80% in steps of 5%
10 to 80% in steps of 1%
10 to 80% in steps of 1%
TMS:
0.1 to 1.0 in steps of 0.01
Phase Hi-set:
200 to 3200% in steps of 200%
Earth fault Hi-set:
50 to 800% in steps of 50%
O/C setting :
Lead 30°
Lead 45°
Lead 60°
Lead 45°
Lead 60°
E/F setting :
Lag 12.5°
Lag 30°
Lag 45°
Lag 30°
Lag 45°
Current input :
2 times rated continuous
20 times rated for 3s
20 times rated for 3s
Current input :
0.2 VA per phase (rated 5A)
0.05VA per phase (rated IA)
0.05VA per phase (rated IA)
Auxiliary supply :
Less than 8W (Non operated)
Less than 10W (Operated)
Less than 10W (Operated)
ACCURACY
CONTACT RATINGS
Contact Durability
Insulation
STANDARD COMPLIANCE
Operating value :
105% to 120% of setting
Drop-off / pick-up :
Between 80% to 95%
Operating Time :
±5% or ±30ms whichever is higher
High set operating value :
±5% or ±30ms whichever is higher
Phase angle :
±9° of the operating angle
High set operating time :
Less than 30ms @ 2 times current setting
Reset Time :
160ms to 180ms
Relay rating :
10A at 24V DC/230V AC
Loaded contact :
10,000 operations min.
Unloaded contacts :
20,000 operations min.
- 2KV RMS, 50 Hz for 1 minute / 2.5 KV for 1 sec .
Between all terminals and earth. - 1KV RMS, 50 Hz for 1 minute across open contacts.
Weight :
2500 gms. (approx),
Case Size :
144sq mm, depth 232mm
Installation :
Flush mounting
Panel cutout :
138mm x 138mm
Accuracy Test :
IEC 60255-3
Insulation Test :
IEC 60255-5
TERMINAL DIAGRAM
