Three Pole,Non-Directional, 3 O/C Or 2 O/C+1 E/F Relay With Inst. Highset
₹23,237.50
Product Code: JRC 066P/JRC 066
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 4574 times
Product Description
Features
- Software based design
- Programmable time current characteristics
- Choice of four IDMT curves
- Draw out case
- Wide range auxiliary supply
- Low burden
DESIGN AND OPERATION
The relay measures the line current from each of the phases and if exceeds the set operating
current, then relay extends a trip signal after the operating time. The relays operating time is
determined by selecting one of the four inverse time current characteristics. The relay has facility
to active / inhibit the high set protection feature. The relay output contacts are self reset type.
Relay operation without any fault current is determinated by trip test facility
Ratings
SETTINGS
OVER LOAD RATING
BURDEN
Current rating :
1A / 5A
Aux. Supply :
1) 20 - 60V DC
2) 75 - 150V AC / DC
3) 175 - 300V DC
185 - 250V AC
2) 75 - 150V AC / DC
3) 175 - 300V DC
185 - 250V AC
Operating characteristics :
1) 3.0s Normal Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
5) 0.6s Extermely Inverse (Optional)
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
5) 0.6s Extermely Inverse (Optional)
Phase Overcurrent :
50% to 200% in steps of 10% or
20% to 140% in steps of 10%
20% to 140% in steps of 10%
Earth fault (IDMT) :
5 to 80% in steps of 5%
TMS :
0.1 to 1.0 in steps of 0.01
(Seperate for O/C & E/F)
(Seperate for O/C & E/F)
Phase Hi-set :
200% to 3200% in steps of 200%
Earth fault Hi-set :
50% to 800% in steps of 50%
Current input :
2 times rated continuous
20 times rated for 3s
40 times of rated for 1s
20 times rated for 3s
40 times of rated for 1s
Current input :
0.2VA at rated 5A
0.05VA at rated 1A
0.05VA at rated 1A
Auxiliary supply :
Less than 3W (Non operated)
Less than 5W (Operated)
Less than 5W (Operated)
ACCURACY
CONTACT RATINGS
CONTACT DURABILITY
INSULATION
MECHANICAL DESIGN
Operating value :
105% to 120% of seting
Drop-off / pick-up :
Between 80% to 95%
Operating Time :
±5% or ±30ms whichever is higher
High Set Operating Value :
+/-5% or +/- 30ms whichever is higher
High Set Operating Time :
Less than 30ms @ 2 times current Setting
Reset Time :
160ms to 180ms
Trip / Alarm :
10A at 24V DC / 230V AC
Loaded contact :
10,000 operations min.
Unloaded contact :
20,000 operations min.
- 2KV RMS, 50 Hz for 1 minute/ 2.5KV FOR 1 sec.
Between all terminals and cases - 1KV RMS, 50 Hz for 1 minute across open terminals
Accuracy test :
IEC 60255-151
Insulation test :
IEC 60255-27
Weight :
Approx. 2500 gms
Size :
144sq mm, depth 232mm
Installation :
Flush mounting
Panel cutout :
138mm x 138mm
TERMINAL DIAGRAM
