Four Pole, Non-Directional, 3 O/C + 1 E/F Relay With Inst. Highset For Both O/C And E/F Elements
₹23,595.00
Product Code: JRC 068
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 6529 times
Product Description
Features
- Software based design
- Programmable time current characteristics
- Choice of four IDMT curves
- Draw out case
APPLICATIONS
The relay provides time graded phase and earth
fault protection of Genrators, Transformers, feeder,
capacitors etc.,
PRINCIPAL OPERATION
The relay measures the line current from each of the phases and if exceeds the set operating current, then relay extends a trip signal after the operating time. The relays operating time is determined by selecting one of the four inverse time current characteristics. The relay has facility to active / inhibit the high set protection feature. The relay output contacts are self reset type. Relay operation without any fault current is determinated by trip test facility.
Ratings
SETTINGS
OVER LOAD RATINGS
BURDEN
Current rating :
1A / 5A
Auxiliary supply :
1)20-60V DC
2)75 – 150V AC / DC
3)175 – 300V DC
185 – 250V AC
2)75 – 150V AC / DC
3)175 – 300V DC
185 – 250V AC
Operating characteristics :
1) 3.0s Normal Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
5) 0.6s Extermely Inverse
2) 1.3s Normal Inverse
3) 1.5s Very Inverse
4) 0.8s Extremely Inverse
5) 0.6s Extermely Inverse
Phase Overcurrent :
50% to 200% in steps of 10% or
20% to 140% in steps of 10%
20% to 140% in steps of 10%
Earth fault :
5 to 80% in steps of 5%
TMS :
0.1 to 1.0 in steps of 0.01(Seperate for O/C & E/F)
Phase Hi-set :
200% to 3200% in steps of 200%
Earth fault Hi-set :
50% to 800% in steps of 50%
Current input :
2 times of rated continuously
20 times of rated for 3s
40 times of rated for 1s
20 times of rated for 3s
40 times of rated for 1s
Current Input :
0.2VA per phase (rated 5A)
0.05VA per phase(rated 1A)
0.05VA per phase(rated 1A)
Auxiliary supply :
Less than 8W(Non operated)
Less than 10W(Operated)
Less than 10W(Operated)
ACCURACY
CONTACT RATINGS
CONTACTS DURABILITY
MECHANICAL DESIGN
STANDARD COMPLIANCE
Operating value :
105% to 120% of setting
Drop-off / pick-up :
Between 80% to 95%
Operating time:
+/-5% or +/- 30ms whichever is higher
High set operating value :
+/-5% or +/- 30ms whichever is higher
High set operating time :
Less than 30ms @ 2 times current setting
Reset Time :
160ms to 180ms
Trip / Alarm :
10A at 24V DC/230V AC
Unloaded contact :
10,000 Operations
Loaded contacts:
20,000 Operations
Weight:
2500gms. Approx.
Case Size:
144 mm,depth 117mm
Installation:
Flush mounting
Panel cuttout:
138 x 138 mm
Accuracy test :
IEC 60255-3
Insulation test :
IEC 60255-5
TERMINAL DIAGRAM
