Two Shot, Auto Reclose Relay
₹19,333.60
Product Code: JRV 142
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 4861 times
Product Description
Features
- Software based design
- Built- in Auto / Manual selection facility
- Fast reset facility
- No. of shots selectable
- High accuracy and stability
- Drawout case
APPLICATION
The auto reclose function is normally used in feeder protection relays that are protecting an overhead line. Most of the overhead line faults are temporary in nature. Upto 85% can be cleared by using the auto reclose function.
PRINCIPLE OF OPERATION
The relay receives the fault initiation from the protection relay and that triggers the auto reclose function. After tripping the circuit breaker (CB), the Auto reclose function can reclose the CB. Normally, the first reclose (or shot) is so short in time, that the consumer cannot notice anything. However, the fault will cleared and the feeder will continue in normal service. Even though the basic principle of Auto reclose is simple, there are a lot of different timers and parameters that have to be set.
Ratings
Settings
Number of shots :
4 shot, 3 shot, 2 shot, 1shot
Auxiliary supply :
30VDC
110VDC
220VDC
110VDC
220VDC
4 – SHOT STD
Reclaim time :
1 – 255s in steps of 1s
DT1, DT2, DT3, DT4 :
0.25s – 60s in steps of 0.25s
Fast reset :
0 – 15s in steps of 1s
3 – SHOT STD
Reclaim time :
200 - 300s in steps of 1s
Dead Time 1 :
10s - 60s in steps of 1s
Dead Time 2 :
30s - 180s in steps of 1s
Fast reset :
0 – 15s in steps of 1s
2 – SHOT STD
Reclaim time :
1 – 255s in steps of 1s
Dead time 1 :
0.25s – 60s in steps of 0.25s
Dead time 2 :
0.25s – 60s in steps of 0.25s
Fast reset :
0 – 15s in steps of 1s
1 – SHOT STD
Reclaim time :
6 - 69s in steps of 1s
Dead time 1 :
0.1s-1.6s in steps of 0.1s
Burden
Accuracy
Contact Ratings
Contact Durability
Insulation
Aux. Supply :
Less than 5W( Non operated)
Less than 7W(Operated)
Less than 7W(Operated)
Operating Time :
+/- 5% or +/- 30ms whichever is higher
Lockout Relay & Reclose Relay :
10A at 24V DC/230V AC
Loaded conatct :
10,000 operations min
Unloaded contact :
100,000 operations min
- 2KV RMS, 50 Hz for 1 minute / 2.5 KV for 1s. Between all terminals and cases.
- 1KV RMS, 50 Hz for 1 minute across open contacts
Weight :
Less than 2500 gms
Case Size :
144sq mm, depth 232 mm
Installation :
Flush mounting
Panel cutout :
138mm X 138mm(W x H)
TERMINAL DIAGRAM
